RCTFRANCE

Emétteur Radio FM

Ametteur FM 20W

Emetteur FM Stéréo Puissance 20 W Réglable de 88.8 Mhz a 108.00 Mhz

FREQUENCY RANGE: 87.5 ÷ 108 MHz

MODULATION:FM

EMISSION CLASS: F3E

VCO TUNING: 25 MHz

FREQUENCY STABILITY: ± 2.5 ppm

SYNTHESIZER STEP: 10KHz

POWER OUTPUT: 0 ÷ 20 Watts ( 0 ÷ 50 Watts - special)

SPURIOUS EMISSION: < - 80 dB or better

HARMONIC EMISSION: < - 65 dB

STEREO SEPARATION: > 55 dB @ 1KHz

DISTORSION:< 0.1 % (TYP. 0.06%) @ 1KHz

BASE BAND:30 Hz ÷ 60 KHz within 0.15 dB

UNWEIGHTED S/N RATIO: > 80 dB (30Hz ÷ 15KHz 50 S RMS)

ASYNCRONOUS AM S/N Ratio: > 70 dB Ref. 100% AM 400Hz

SYNCRONOUS AM S/N Ratio: > 65 dB with FM @ 75KHz @400Hz

PRE-ENPHASIS:50 OR 75 μ int. selectable

RF OUT CONNECTOR:N-F 50 Ohm

MPX INPUT CONNECTOR:BNC-F

MPX INPUT IMPEDANCE: 2 KOhm

SCA INPUT CONNECTOR:3 BNC-F

COOLING: Forced air by two brushless fans

OP.TEMPERATURE RANGE: 10 ÷ +45 °C

MAXIMUM UMIDITY:90 %

AC SUPPLY:100 ÷ 240 VAC - 47 ÷ 63 Hz

DIMENSION:1 unit rack 19", 405mm depth

WEIGHT:5 Kg

Emetteur FM 100W

Emetteur FM Stéréo Puissance 100 W Réglable de 88.8 Mhz a 108.00 Mhz

FREQUENCY RANGE:87.5÷108 MHz (76÷88MHz on request)

MODULATION:FM

EMISSION CLASS: F3E

VCO TUNING: 25 MHz

FREQUENCY STABILITY: ± 2.5 ppm

SYNTHESIZER STEP: 10KHz

POWER OUTPUT: 0 ÷ 130 Watts

SPURIOUS EMISSION: < - 80 dB or better

HARMONIC EMISSION: < - 65 dB

STEREO SEPARATION: > 55 dB @ 1KHz

DISTORSION: < 0.1 % (TYP. 0.06%) @ 1KHz

BASE BAND: 30 Hz ÷ 60 KHz within 0.15 dB

UNWEIGHTED S/N RATIO: >80 dB (30Hz ÷ 15KHz 50 S RMS)

ASYNCRONOUS AM S/N Ratio:> 70 dB Ref. 100% AM 400Hz

SYNCRONOUS AM S/N Ratio: > 65 dB with FM @ 75KHz @400Hz

PRE-ENPHASIS:50 OR 75 μ int. selectable

RF OUT CONNECTOR: N-F 50 Ohm

MPX INPUT CONNECTOR: BNC-F

MPX INPUT IMPEDANCE: 2 KOhm

SCA INPUT CONNECTOR: 3 BNC-F

COOLING: Forced air by two brushless fans

OP.TEMPERATURE RANGE: 10 ÷ +45 °C

MAXIMUM UMIDITY: 90 %

AC SUPPLY: 100 ÷ 240 VAC - 47 ÷ 63 Hz

DIMENSION: 2 unit rack 19", 405mm depth

WEIGHT: 10 Kg

Emetteur FM 250W

Emetteur FM Stéréo Puissance 250 W Réglable de 88.8 Mhz a 108.00 Mhz

FREQUENCY RANGE: 87.5÷108 MHz (76÷88 MHz on request)

MODULATION: FM

EMISSION CLASS: F3E

VCO TUNING: 25 MHz

FREQUENCY STABILITY: ± 2.5 ppm

SYNTHESIZER STEP: 10KHz

POWER OUTPUT: 0 ÷ 250 W (max.270W)

SPURIOUS EMISSION: < - 80 dB or better

HARMONIC EMISSION: …< - 65 dB

STEREO SEPARATION: > 55 dB @ 1KHz

DISTORSION: < 0.1 % (TYP. 0.06%) @ 1KHz

BASE BAND: 30 Hz ÷ 60 KHz within 0.15 dB

UNWEIGHTED S/N RATIO: > 80 dB (30Hz ÷ 15KHz 50 uS RMS)

ASYNCRONOUS AM S/N Ratio: > 70 dB Ref. 100% AM 400Hz

SYNCRONOUS AM S/N Ratio: > 65 dB with FM @ 75KHz @400Hz

PRE-ENPHASIS:50 OR 75 μS int. selectable

RF OUT CONNECTOR: N-F 50 Ohm

MPX INPUT CONNECTOR: BNC-F

MPX INPUT IMPEDANCE: 2 KOhm

SCA INPUT CONNECTOR: 3 BNC-F

COOLING: Forced air by brushless fan

OP.TEMPERATURE RANGE: 10 ÷ +45 °C

MAXIMUM UMIDITY: 90 %

AC SUPPLY: 100 ÷ 240 VAC - 47 ÷ 63 Hz

DIMENSION: 2 unit rack 19", 435mm depth

WEIGHT: 12Kg

Emetteur FM 500W

Emetteur FM Stéréo Puissance 500 W Réglable de 88.8 Mhz a 108.00 Mhz

FREQUENCY RANGE: 87.5 ÷ 108 MHz (76 88MHz on request)

TYPE:FULL SOLID STATE MOS-FET-WIDE BAND

MODULATION: FM

EMISSION CLASS: F3E

VCO TUNING: 25 Mhz

FREQUENCY STABILITY: 2,5 ppm

SYNTHESIZER STEP: 100KHz (10KHz on request)

POWER OUTPUT: 0 ÷ 500 Watts

SPURIOUS EMISSION: < - 80 dB or better

HARMONIC EMISSION: < - 60 dB

STEREO SEPARATION: > 55 dB @ 1KHz

DISTORSION: < 0.1 % (TYP. 0.06%) @ 1KHz

BASE BAND: 30 Hz ÷ 60 KHz within 0.15 dB

UNWEIGHTED S/N RATIO: > 80 dB (30Hz 15KHz 50 S RMS)

ASYNCRONOUS AM S/N Ratio: > 65 dB Ref. 100% AM 400Hz

SYNCRONOUS AM S/N Ratio: > 65 dB with FM @ 75KHz @400Hz

PRE-ENPHASIS: 50 OR 75 ìS int. Selectable

RF OUT CONNECTOR: N female

MPX INPUT CONNECTOR: BNC-F

MPX INPUT IMPEDANCE: 2 Kohm

SCA INPUT CONNECTOR: 3 BNC-F

PROTECTIONS:OVERLOAD,

VSWR in a fold-back reducing power

TEMPERATURE

COOLING: Forced Air

OP.TEMPERATURE RANGE: 0 ÷ +50 °C

MAXIMUM UMIDITY: 90 %

AC SUPPLY: 100 ÷ 240 VAC - 47 ÷ 63 Hz

DIMENSION: 3 unit rack 19", 530mm depth

WEIGHT: 15 Kg

Emetteur FM 1000W

Emetteur FM Stéréo Puissance 1000 W Réglable de 88.8 Mhz a 108.00 Mhz

FREQUENCY RANGE: 87.5 ÷ 108 MHz (76 88MHz on request)

TYPE:FULL SOLID STATE MOS-FET-WIDE BAND

MODULATION: FM

EMISSION CLASS: F3E

VCO TUNING: 25 MHz

FREQUENCY STABILITY: 2,5 ppm

SYNTHESIZER STEP: 100KHz (10KHz on request)

POWER OUTPUT: 0 ÷ 1.000 Watts

SPURIOUS EMISSION: < - 80 dB or better

HARMONIC EMISSION: … < - 60 dB

STEREO SEPARATION: > 55 dB @ 1KHz

DISTORSION: < 0.1 % (TYP. 0.06%) @ 1KHz

BASE BAND: 30 Hz ÷ 60 KHz within 0.15 dB

UNWEIGHTED S/N RATIO: > 80 dB (30Hz 15KHz 50 S RMS)

ASYNCRONOUS AM S/N Ratio: > 65 dB Ref. 100% AM 400Hz

SYNCRONOUS AM S/N Ratio: … > 65 dB with FM @ 75KHz @400Hz

PRE-ENPHASIS: 50 OR 75 ìS int. Selectable

RF OUT CONNECTOR: 7/16” female

MPX INPUT CONNECTOR: BNC-F

MPX INPUT IMPEDANCE: 2 Kohm

SCA INPUT CONNECTOR: 3 BNC-F

PROTECTIONS:

COOLING: Forced Air

OP.TEMPERATURE RANGE: 0 ÷ +50 °C

MAXIMUM UMIDITY: 95 % non condensing

AC SUPPLY: 100 ÷ 240 VAC - 47 ÷ 63 Hz

DIMENSION: 3 unit rack 19", 530mm depth

WEIGHT:18Kg

ASM5K-C

Emétteur FM stéréo Puissance 5000W

Gamme de frequence 87.5 108 Mhz

Power range Potenza di ingresso norm. 40 w

Input power max. 60 w

Potenza di uscita (- 0,5 db) 5000 w Output power

Attenuazione sull'uscita monitor 54 dB, tip

Attenuation on monitor output

Attenuazione armoniche <75 dB Attenuation harmonics

Impedenza entrata/uscita 50 Ohm In/out impedance

Connettore d'entrata N Input connector

Connettore d'uscita 7/8 Output connector 7/8　

Uscita Monitor RF BNC

Output monitor RF

Alimentazione elettrica trifase 400 Vac (230 su richiesta)

Threephase electrical supply 400 Vac (230 on demand) Corrente massima prese ausiliarie 1 A @ 230 Vac, senza fusibile

Max current on aux terminal 1 A @ 230 Vac, no fuse

Peso 35 Kg. Weight Fattore di potenza 0,97

Power factor

Telemetria opzionale per tutti i modelli

Telemetry optional all models

Dimensioni cm. (W x H x D) 48 x 17,6 x 67 Dimensions

Temperature di funzionamento

0° 35° C raccom. -10° 45° C max

Operating temperature

EMETTEUR FM STEREO 15 W

Cliquez ici

Emetteur FM Stéréo Puissance 70 W Limiteur Compresseur Incorporé Entrée RDS et MPX Vu-mètre de Contrôle Puissance et Fréquence Réglables de 0 a 70 W de 88.8 Mhz a 108.00 Mhz Entrée Modulation Réglable Prévu Pour Fonctionner 24/24 Heures en Continu Alimentation 220 Volts Protections Electroniques de Températures et TOS Mise en Sécurité Automatique

EMETTEUR FM STEREO 30W

Cliquez ici

Technical Features:
RF features:Output Power: 33W +/- 5% variation across the band
RF Output Impedance: 50 Ohms
RF Output connector: N Female
Frequency Range: 76,0 to 98MHz and 87,5 to 108,1MHz
Frequency Step: Default 100KHz, selectable for 200kHz or others under request
Frequency Programmability: UP/DOWN Keys, safety hold programmable on the front panel
Frequency Stability: 5 ppm, 2 or 1 ppm under request
Type of Modulation: F3, FM direct modulation (RF oscillator directly on the frequency)
Harmonic and Spurious Attenuation: >80dBc
Residual AM modulation (Assyncr.) Approximately 0,05% (55dB)
Residual AM modulation (Syncr.) Approximately 0,1% (65dB)
Intermodulation Distortion: <0,05% @ 1kHz
Frequency Response Capability: 20Hz to 200kHz

EMETTEUR FM STEREO 70W

Cliquez ici

Technical Specifications

RF features:Nominal output power: Broadband 60-80W +/- 5%
RF Output Impedance: 50 Ohms
RF Output connector: N Female, or UHF female under request
Frequency Range: 87,5 Mhz to 108,1 MHz
Frequency Step: 100kHz standard, 200kHz and 50kHz under request
Frequency programmability: UP/DOWN keys in front panel (internal hold safetyjumper)
Frequency Stability: +/- 5ppm 0 degrees C to 50 degrees C (period of stabilization
3 minutes) 1 or 2ppm under request
Type of modulation: F3, FM direct modulation (RF oscillator directly in the
fundamental frequency)
Harmonic and Spurious Attenuation: > -80dBc
Residual AM Modulation Asynchronous: Approximately 0,05% (55dB) Approximately 0,05% (55dB)
Residual AM Modulation Synchronous: Approximately 0,1% (65dB) Approximately 0,1% (65dB)
Inter-modulation Distortion: < 0,05% measurement, 1 and 1,3KHz, ratio 1:1 at
100% modulation THD+N: <0,05% @ 1kHz
Frequency Response Capability:
20Hz to 200kH

Weight 12Kg

EMETTEUR FM STEREO 150W

RF features:Output Power: 160W +/- 5% variation across the band
RF Output Impedance: 50 Ohms
RF Output connector: N Female
Frequency Range: 76,0 to 98MHz and 87,5 to 108,1MHz
Frequency Step: Default 100KHz, selectable for 200kHz or others under request
Frequency Programmability: UP/DOWN Keys, safety hold programmable on the front panel
Frequency Stability: 5 ppm, 2 or 1 ppm under request
Type of Modulation: F3, FM direct modulation (RF oscillator directly on the frequency)
Harmonic and Spurious Attenuation: >80dBc
Residual AM modulation (Assyncr.) Approximately 0,05% (55dB)
Residual AM modulation (Syncr.) Approximately 0,1% (65dB)
Intermodulation Distortion: <0,05% @ 1kHz
Frequency Response Capability: 20Hz to 200kHz

EMETTEUR FM STEREO 300W

Cliquez ici

RF features:Output Power: 350W +/- 5% variation across the band
RF Output Impedance: 50 Ohms
RF Output connector: N Female
Frequency Range: 76,0 to 98MHz and 87,5 to 108,1MHz
Frequency Step: Default 100KHz, selectable for 200kHz or others under request
Frequency Programmability: UP/DOWN Keys, safety hold programmable on the front panel
Frequency Stability: 5 ppm, 2 or 1 ppm under request
Type of Modulation: F3, FM direct modulation (RF oscillator directly on the frequency)
Harmonic and Spurious Attenuation: >80dBc
Residual AM modulation (Assyncr.) Approximately 0,05% (55dB)
Residual AM modulation (Syncr.) Approximately 0,1% (65dB)
Intermodulation Distortion: <0,05% @ 1kHz
Frequency Response Capability: 20Hz to 200kHz

EMETTEUR FM STEREO 700W

RF Power Output x Input Power:

RF features:Output Power: 700W +/- 5% variation across the band
RF Output Impedance: 50 Ohms
RF Output connector: N Female
Frequency Range: 76,0 to 98MHz and 87,5 to 108,1MHz
Harmonic and Spurious Attenuation: >85dBc

EMETTEUR FM STEREO 1000 W

Cliquez ici

Emetteur FM Séréo puissance 1000W fréquence réglable de 88.8 a 108.00 Mhz Protection electronique qualitée Broadcast

RF SECTION
Output Power  1000W
RF Output Connector  EIA 7/16"
RF Output Impedance  50 homs
Frequency Range  87.6 - 107.9 MHz
Frequency Programmability  Step 10/50/100kHz from panel
Frequency Stability  2.5ppm (option 0.05ppm)
Spurious and Harmonic Suppression  Meets or exceeds all FCC and CCIR requirements
Modulation Capability  Meets or exceeds all FCC and CCIR requirements
Asynchronous AM S/N ratio  65dB or other
Synchronous AM S/N Ratio  60dB or otherGENERAL
AC Power Requirement  220Vac, +20%, 50/60Hz
200Vac (on request)
Power Consumption  2500VA
RS232 Socket  DB9 Connector (on amplifier)
RS485 Socket  DB9 Connector (on amplifier)
Telemetering Socket  DB9 Connector (on amplifier)
Dimensions  Rack 19"-4U (optional)
Cooling  Forced air
Temperature  -5°/+45°C

EMETTEUR FM STEREO 6000 W

Cliquez ici

Emetteur FM Séréo puissance 6000W fréquence réglable de 88.8 a 108.00 Mhz Protection electronique qualitée Broadcast

RF SECTION
Output Power  5500W
RF Output Connector  1+5/8" - 7/8"
RF Output Impedance  50 homs
Frequency Range  87.6 - 107.9 MHz
Frequency Programmability  Step 10/50/100kHz from panel
Frequency Stability  2.5ppm (option 0.05ppm)
Spurious and Harmonic Suppression  Meets or exceeds all FCC and CCIR requirements
Modulation Capability  Meets or exceeds all FCC and CCIR requirements
Asynchronous AM S/N ratio  60dB or other
Synchronous AM S/N Ratio  50dB or otherGENERAL
AC Power Requirement  400Vac, 3Ph+N (other voltages on request)
Power Consumption  13000VA
Dimensions  Rack 19"-39U
Temperature  -5°/+45°C

EMETTEUR FM STEREO 10000W

Cliquez ici

Emetteur FM Séréo puissance 10000W fréquence réglable de 88.8 a 108.00 Mhz Protection electronique qualitée Broadcast

RF SECTION
Output Power  10kW
RF Output Connector  1+5/8"
RF Output Impedance  50 homs
Frequency Range  87.6 - 107.9 MHz
Frequency Programmability  Step 10/50/100kHz from panel
Frequency Stability  2.5ppm (option 0.05ppm)
Spurious and Harmonic Suppression  Meets or exceeds all FCC and CCIR requirements
Modulation Capability  Meets or exceeds all FCC and CCIR requirements
Asynchronous AM S/N ratio  60dB or other
Synchronous AM S/N Ratio  50dB or otherGENERAL
AC Power Requirement  400Vac, 3Ph+N (other voltages on request)
Power Consumption  26000VA
Dimensions  N° 2 Racks 19"-39U
Temperature  -5°/+45

Shopping cart by ShopFactory